Risk Of Injection Or Severe Cutting Injury - Mi-T-M HMT-4004-0MGH Manual Del Operador

READ ALL SAFETY WARNINGS BEFORE USING PRESSURE WASHER
HAZARD
RISK OF INJECTION
OR
SEVERE CUTTING INJURY
RISK OF
ELECTROCUTION
OR ELECTRICAL SHOCK
6
IMPORTANT SAFETY INSTRUCTIONS
POTENTIAL CONSEQUENCE
Serious injury or death could
occur from high pressure spray
penetrating the skin.
Serious injury or death may occur
from contact with electricity.
PREVENTION
Keep clear of nozzle and spray! Never
put your hand, fingers or body directly
over the spray nozzle.
Never point the high pressure discharge
spray at yourself or anyone else. This
equipment is to be used only by trained
operators.
Always keep operating area clear of all
persons.
Do not allow children to operate this unit.
Seek emergency medical care if the spray
appears to have penetrated the skin! Do
not treat as a simple cut!!
High pressure hoses and fuel lines should
be inspected daily for signs of wear. If ev-
idence of failure exists, promptly replace
all suspect hoses and fuel lines to prevent
the possibility of injury from the high pres-
sure spray. If a hose or fitting is leaking,
Never place your hand directly on the leak
Never operate the gun with the trigger
wired in the open position. To prevent ac-
cidental discharge, the trigger gun should
be securely locked when not in use.
Before removing the spray nozzle or
servicing the unit, always shut off the unit
and trigger the gun to release trapped
pressure. (Even after you shut off the
unit, there is high pressure water left in
the pump, hose and gun until you release
it by triggering the gun.)
Do not direct spray on or into electrical
installations of any kind! This includes
electrical outlets, light bulbs, fuse boxes,
transformers, the unit itself, etc.
Do not allow metal components of the
pressure washer to come in contact with
live electrical components.
HMT-4004-0MGH Operator's Manual