Steren COM-545 Manual De Instrucciones

Before using your new USB Laser Mouse, please read this instruction Before using your new USB Laser Mouse, please read this instruction
manual to prevent any damage. Put it away in a safe place for future manual to prevent any damage. Put it away in a safe place for future
references. references.
• Clean only with a soft, dry cloth.
• Warranty is void if you try to open the device.
• Do not use or store the equipment near wet places.
• Plug & Play
• 2 different resolutions: 800, 1600 DPIs
• 5 buttons
• OS supports: Windows 98, Windows ME, Windows 2000, Windows XP,
Windows Vista
• Drivers are not required
CONNECTING THE MOUSE
1.- Turn the computer on.
2.- Connect the USB cable to an available USB port.
3.- The computer will detect the new hardware. XP will install the required fi les. It
is possible that in other systems the Found new hardware wizard will appear, just
follow the instructions. Required drivers are part of Windows.
4.- After a few seconds, the mouse is ready to use.
5.- To set the parameters of the mouse, open Control Panel >> Mouse and
change them according your necessities.
Control Panel menu is located in Start menu Control Panel menu is located in Start menu
Side buttons allows you to move forward or backward through Web pages Side buttons allows you to move forward or backward through Web pages
(this function is available on Windows Explorer, other web browser may (this function is available on Windows Explorer, other web browser may
have other functions for them). have other functions for them).
HOW TO CHANGE THE RESOLUTION
These mouse includes two different resolutions which you can change in the
desired time and according your needs.
At the bottom of the mouse you will fi nd a button marked as 800/1600dpi. Press
the button to change the resolution to 1600dpi, press once again to back to
800dpi.
The computer must be on and the mouse working it, in order to change the The computer must be on and the mouse working it, in order to change the
resolution. resolution.
It is possible that when you turn the computer off, the mouse lose the It is possible that when you turn the computer off, the mouse lose the
resolution confi guration. Then, you need to press the button once again resolution confi guration. Then, you need to press the button once again
when you want to use it. when you want to use it.
SPECIFICATIONS
Input: 5V 20mA (through USB)
Resolution: 800, 1600 DPI
Product design and specifi cations are subject to change, without notice. Product design and specifi cations are subject to change, without notice.
IMPORTANT
FEATURES
Product: USB Laser Mouse
Part number: COM-545
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the
original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package,
and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accesories to costumer, as well as warranty service, at
any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow
enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call Center.
Call Center
01 800 500 9000
WARRANTY
CONDITIONS