Steren COM-548 Manual De Instrucciones

Before using your new Electronic insect killer, please read
Before using your new Laser desktop mouse,
this instruction manual to prevent any damage. Put it away in
please read this instruction manual to prevent any damage.
IMPORTANT
• Clean only with a soft, dry cloth.
• Warranty is void if you try to open the device.
• Do not use or store the equipment near wet places.
- Plug & Play.
- 6 buttons.
- OS supports: Windows 98, Windows ME, Windows 2000, Windows XP,
Windows Vista.
- Drivers are not required.
- Forward and Backward functions.
- Laser sensor.
1.- USB cable
2.- Right button
3.- Left button
4.- Forward button
5.- Backward button
6.- Scroll / middle button
7.- Resolution (DPI) button
8.- Laser
CONNECTING THE MOUSE
1.- Turn the computer on.
2.- Connect the USB cable to an
available USB port.
3.- The computer will detect the new hardware. XP will install the required files. It
is possible that in other systems the Found new hardware wizard will appear, just
follow the instructions. Required drivers are part of Windows.
FEATURES
CONTROLS
1
3
4
6
5
7
8
4.- After a few seconds, the mouse is ready to use.
5.- To set the parameters of the mouse, open Control Panel >> Mouse and
change them according your necessities.
Control Panel menu is located in Start menu.
Upper buttons allows you to move forward or backward through Web pages
(this function is available on Windows Explorer, other web browser may have
other functions for them).
To change mouse's resolution, press DPI button.
This parameter explains the equivalence of the movement mouse on the
surface (the table) with the moving to the cursor on your screen.
Input:
Resolution:
Before using your new Electronic insect killer, please read
Product design and specifications are subject to change
this instruction manual to prevent any damage. Put it away
without previous notice.
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
1.- This warranty card with all the required information, invoice or
2
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
SPECIFICATIONS
5V - - - (through USB port)
800, 1200, 1600 DPI
Product: Laser desktop mouse
Part number: COM-548
Brand: Steren
WARRANTY
CONDITIONS
RETAILER INFORMATION