Battery Status Display; Charging The Device; Jump Starter - BGS technic 3381 Manual Del Usuario

CONNECTOR / LED
LED EMERGENCY LAMP
1. Briefly press the button, the device switches on.
2. Press the button for 3 seconds, the LED lights up constantly.
3. Press the button again. The LED flashes stroboscopic.
4. Press the button again. The LED flashes an SOS signal.
5. Press the button again. The LED goes out and the device switches off.

BATTERY STATUS DISPLAY

Press the button: the device switches on and the battery status is displayed.
Status display
Battery
capacity

CHARGING THE DEVICE

1. Insert the charger into a socket.
2. Connect the Micro USB charger cable with the 5V
charging socket.
12V JUMP STARTER
1. Make sure that the battery status is not below 50%.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen

Jump starter

LED
cable socket lamp
Press the button for longer than 3 seconds,
the LED lamp is switched on.
Unlit 1
Flashes
0 % < 5 %
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Battery
status
Charge Output
socket socket
Switch
1 2
Illuminated Illuminated
5 % ~ 25 % 25 % ~ 50 %
Switch
3
Illuminated Illuminated
50 % ~ 75 % 75 % ~ 100 %
Battery
status
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
4