Battery Status; Charging The Device; Jump Starter - BGS technic 3382 Manual De Instrucciones

CONNECTOR / LED
LED
lamp
LED EMERGENCY LAMP
1. Briefly press the button, the device switches on. LED lights up constantly.
2. Press the button again. LED flashes stroboscopic.
3. Press the button again. LED flashes SOS.
4. Press the button again. LED goes out and the device switches off.

BATTERY STATUS

Press the button: the device switches on and the battery status is displayed in column form.
Status display
Battery
capacity

CHARGING THE DEVICE

1. Insert the charger into a socket.
2. Connect the charger cable to the 15V charging socket.
or
1. Inserting the one end of car charger into the jack of cigar
lighter.
2. Inserting the other end of car charger into the device.
12V JUMP STARTER
1. Make sure that the battery status is not below 50%.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Light
switch
On / Off Battery
Switch
status
Unlit 1
Flashes Illuminated
0 % < 5 % 5 % ~ 25 %
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
USB- Output
USB- Output
(1): 5V / 1A (2): 5V / 2A
12V / 15V Output
Charge socket
socket
19V/3,5A
1 2
Illuminated
25 % ~ 50 %

Jump starter

Output
cable socket
socket
EC5
12V/10A
3 4
Illuminated Illuminated
50 % ~ 75 % 75 % ~ 100 %
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed