Steren COM-280 Manual De Instrucciones página 28

4. Click on the Settings tab to access the lpr client settings.
Change the settings as necessary, and press OK to let the
changes take effect.
The parameters are as follows:
♦ Communication Timeout Determines how long, in
seconds, the system will wait before determining that it
has lost connection with lpr/lpd print servers.
♦ Retry Interval Determines how long, in seconds, the
system will wait before retrying a lost connection.
♦ Retry Times Determines how many times the system
will retry a lost connection with an lpr/lpd print server. If
Infi nite is checked, it will retry indefi nitely.
♦ Spool Path Gives the directory path where the system
will temporarily store lpr/lpd print server job fi les.
ENGLISH-28