Teka HDL-718 Manual Del Usuario página 15

3172713-001 16/12/14 12:04 Página 15
, and
programme the electronic clock/timer func-
tions.
Sensor: enables you to change visible
information and select clock/timer settings
between the top and bottom cavities
Symbols: Lights up when the top cavity
is chosen.
Symbols: lights up when the bottom
cavity is chosen
Setting the Time
•
When you plug in the oven, you will see the
clock flashing 12:00.
•
Set the clock by touching the + or – sensor.
You will hear 2 beeps confirming that the
time has been set.
•
To change the time, touch the + and – sym-
bols together until the indicated time flash-
es on the display. Change the time by press-
ing the + or – sensors. Two beeps will then
confirm that the new time has been set.
NOTE
The clock light has a night mode so the dis-
play light will dim between 00:00 and 6:00
hours.
Manual Operation
•
After setting the clock, the oven is ready for
use. Select a cooking function and tempera-
ture.
•
The
depending on the top and bottom cavity
functions.
•
During cooking, the
to indicate that heat is being transmitted to
the food.
•
This symbol disappears when the selected
temperature has been reached.
•
Set the controls to
Sensors: enable you to
symbols will light up
symbol will light up
to turn off the oven.
Electronic Clock/Timer Settings
Timer Alarm: The alarm will go off at the pro-
grammed time, even if the oven is not in use.
Cooking Time (top and bottom cavity): This
function allows you to programme the cooking
time, after which the oven will turn off auto-
matically.
Cooking Stop Time (top and bottom cavity):
This setting allows you to programme the time
for cooking to stop, after which the oven will
turn off automatically.
Cooking Time and Cooking Stop Time (top
and bottom cavity): This setting allows you to
programme the cooking time and cooking stop
time. The oven switches on automatically at
the set time and operates for the selected
cooking time (Cooking Time). It then switches
off automatically at the indicated time (Cook-
ing Stop Time).
Programming the Timer Alarm
1. Touch the sensor with your fingertip
until the symbol starts flashing on the
display. The clock will also flash 00:00.
2. Select the time after which you want the
alarm to sound by pressing the + or –
sensor.
3. You will hear 2 beeps to confirm that the
time has been set. The clock will start
counting down from the selected time and
the symbol will flash slowly.
4. When the time is up, the alarm will go off
and the symbol will flash quickly.
5. Touch any sensor to stop the alarm. The
symbol will then disappear.
If you want to change the timer alarm, simply
touch the sensor with your fingertip and
then press the + or – sensor. You will hear 2
beeps to confirm that the time has been
changed. The clock will then start counting
down from the new time and the
will flash slowly.
NOTE
You cannot see the current time on the display
when the timer alarm is set.
symbol
15