Preparing The Remote Control - Lenco DVD-305 Manual Del Propietário

REMOTE CONTROL

Preparing the Remote Control

Install the battery into the remote control.
1) First put the battery into the batter house, then use the battery-door cover the battery,
and press it firmly.
BATTERY-DOOR
2) Switch the battery-door to the lock position. (Please refer to the following
diagram.)Battery: a button cell lithium battery (CR2025 3V)
SWITCH THE BATTERY-DOOR
TO THE LOCK POSITION
Using the Remote Control:Face the remote control towards the player front face IR
mark (remote control signal receiver). Operation angle: About ±30 degree in each the
direction of the front of the IR mark.
BATTERY
BATTERY HOUSE
LOCK THE BATTERY
11