General Operation; Turning The Unit On/Off; Basic Play; Dvd Video Menu Play - Lenco DVD-305 Manual Del Propietário

GENERAL OPERATION

TURNING THE UNIT ON/OFF

Turning on the Player
After all connections are completed
correctly, Press the
the front panel to turn on the power. When
the unit is on, it will search the disc
automatically. If there is a disc in the disc
slot, the unit will start playback
automatically.
Turning off the Player
When the power is on press the
button on the front panel or on the
remote control to turn off the power.
Loading a Disc
Insert the disc into the disc slot with the
printed side facing up, the player will play
the disc automatically.
Removing a Disc
When the disc stops playing, press the
eject button on the front panel to eject
the disc.

BASIC PLAY

Stopping Playback
- Shortly press the
panel or on the remote control one time
to pre-stop the unit playback. When the
button on the front panel or on the
remote control is pressed, normal
playback will continue.
- Press the button twice to stop the
playback and go back to the DVD
LOGO.
Pausing Play
Pressing on the remote control or
on the front panel during playback will
stop playback temporarily. To return to
normal playback, press
If you play a DVD/VCD/SVCD, press
on the remote control again to stop at the
next picture (step function). If you play a
CD/MP3/Picture CD, pressing
remote control again is ineffective.
Rapid Forward / Rapid Reverse
Press the /
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follows.
DVD/VCD/CD/MP3:
Normal Playback
power button on
button on the front
or .
on the
during playback.
X2 X4 X8
Slow Motion Playback (For DVD Only)
Press the
during play.
Each time the button is pressed, the speed
of slow forward/reverse changes according
to the disc as follows.
DVD:
Normal Playback
In slow motion state, press OK or
power
remote control or
recover normal playback.
Skipping Track
Press the
control or on the front panel during playback.
Press
to skip to the previous track.
Note:
For some VCD2.0 discs (PBC-playback
control), the
unavailable.
Volume Level Adjustment
Pressing the VOLUME+/- button on the
remote control to increase or decrease the
volume level.

DVD VIDEO MENU PLAY

When playing a DVD disc in the DVD player:
1) The disc will be played automatically
and stop at menu picture.
2) Use the
remote control to move between the
highlight bars in the menu.
3) Press the OK button on the remote
control to confirm the selected item.

MENU FUNCTION

Press the MENU button on the remote
control during DVD mode wll return to the
menu stored in the current disc.
AV OUTPUT
There is a AV OUTPUT TYPE Switch on the
rear case, when switch it to A,
AUDIO/VIDEO OUTPUT (1) /(2) are controlled
by MODE button on the front panel or on
the remote control, and the output signal
can be changed among DVD, AV IN 1 (on
the front panel ) and AV IN 2 (on the rear
case). When you switch it to B, AUDIO /
VIDEO OUTPUT (1) can not be controlled
by the MODE button.
AUDIO / VIDEO OUTPUT (1) is connected
to AV IN 1 directly.
AUDIO / VIDEO OUTPUT (2) is controlled
by the MODE button, and you can change
X20
it among DVD, AV IN 1 and AV IN 2.
12
button on the remote control
/
SF1/2
SF1/7
on the front panel to
buttons on the remote
/
to skip to the next track, and press
buttons may be
/
cursor buttons on the
/ , /
SF1/3 SF1/4
SF1/6 SF1/5
on the