Uline PURE FLOW 1000 H-1297 Manual De Instrucciones página 4

11. Position nozzle activating straps over top of door and
down raised area on either side of the door handle
so the straps cover the labels on the activation door.
(See Figure 11)
12. Push plastic fastener into hole in door until flange is
seated against the door. (See Figure 11)
13. Push center pin of fastener until it snaps into place
flush with fastener head. (See Figure 11)
14. Position tamper seal on middle right-hand side of
door. Half the seal must be on the door and the
other half on the unit surface. (See Figure 12)
15. Attach lock or inspection tag through tab on cover.
(See Figure 12)
PAGE 4 OF 12
CARTRIDGE INSTALLATION CONTINUED
1-800-295-5510
Figure 11
Plastic Fastener
Figure 12
uline.com
Center Pin
Tab
Inspection
Tag
Tamper
Seal
0521 IH-1297