Descargar Imprimir esta página

Power Switch - Novik Neo ROLLING SOUND 10BT Manual De Instrucciones

Publicidad

1
MIC VOL: Use this knob to regulate the microphone output volume
2
ECHO: Use this knob to adjust the echo effect.
3
MASTER VOL: Use this knob to adjust the general signal amount of the loudspeaker
4
LINE VOL: Use this knob to regulate the line input volume
5
MP3 VOL: Use this knob to adjust the volume of MP3 Player
6
MIC IN (1/4" plug): Use these connection for microphone input.
7
LINE IN (3.5mm jack & RCA): This connection is designed to accept a line input signal
from a mixer, mp3 players or other line level device.
8
LINE OUT (1/4" Plug): This is to connect to other amplifiers or active speaker box to
output signal
9
CHARGE Indicator: When the battery is being charged, it will shine
10
LOW Indicator: When the battery is low, it will shine.
11
DC12V IN: This is to connect to DC12V power supply to get power to work.
12
FUSE HOLDER 12V: This housing stores T3.15A protective fuse. Please always change
correct fuse when need.
13
POWER SWITCH: This is to turn on or turn off the power
Power Socket: Use this connector to supply main power to the unit via the included
detachable power cord.
14
AC VOLTAGE 110V/220V: If you need to change the voltage, please use screw driver to
open the plastic cover first and then switch to your required voltage.
15
FUSE HOLDER 110/220V: This housing stores T1A/T0.5A protective fuse. Please always
change correct fuse when need.
9
www.novikneo.com

Publicidad

loading

Este manual también es adecuado para:

5110131