Installing The Cabinet - Husky HOUC3304B11 Guía De Uso Y Cuidado

Assembly (continued)
5

Installing the cabinet

At least two people are needed for this step.
WARNING:
□ Carefully lower the cabinet (B) between the four support legs (G)
until each support leg is properly secured under the top lip of
the cabinet and the holes are in alignment.
7
Attaching the side handle
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□ Attach the side handle (D) to the tool cart using four
screws (AA). Do not over tighten.
6
□ Secure the cabinet (B) to the four legs (G) using ten screws (AA).
□ Tighten all screws on the cart at this time. Be careful not
AA
B
G
8
□ Attach the extendable side table (C) to the tool cart by using two
AA
D
7
Attaching the legs
to over tighten.
Attaching the extendable side table
screws (AA). Do not over tighten.
C
AA
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc
B
G
HUSKYTOOLS.COM
e .