Installing The Base - HAMPTON BAY 326 254 Guía De Uso Y Mantenimiento

Assembly (continued)
6
Installing the side panel
Attach the Left Side Panel (E) to the Center Shelf (D),
using Bolts (AA) through the holes in the Plastic
Connector (KK) and tighten.
Repeat for the Right Side Panel (F).
NOTE:
A stubby screwdriver (not
included) is reccomended for this step
AA
E
8
Installing the middle support panel
Attach the Middle Support Panel (N) on the top of the
assembly from the step 7 as shown in the diagram.
Insert Wood Dowels (CC) into the holes in the Center
Shelf (D).
Insert a Long Flathead Screw (BB) through the pre-drilled
hole and tighten, from the bottom of the Center Shelf (D).
7
KK
F
9

Installing the base

Insert Wood Dowels (CC) into the holes in the
Hearth/Base (A).
Push the Base (A) snug to the completed assembly from
step 6 as shown in the diagram.
Use a Phillips head screwdriver to tighten the Long
Flathead Screws (BB) through the pre-drilled holes in
the Hearth/Base (A).
CC
BB
N
CC
BB
Please contact 1-877-527-0313 for further assistance.
A
D
HAMPTONBAY.COM