Kettler 0S04011-0010 Instrucciones De Montaje página 5

GB IRL
n
Remember that the children's natural play instinct and temper may lead to unforeseeable situations
excluding a responsibility of the manufacturers.
n
Although dangers to children during proper use of the apparatus are highly unlikely, all play on the
apparatus should be monitored by an adult.
n
For cleaning and caring the swing only use environmentally friendly and no aggressive or corroding
agents.
n
Regularly grease the moving parts with some drops of oil.
n
Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dispose of this
article correctly and safely (local refuse sites).
Instructions for Assembly
n
Caution! When installing the product, keep children at a safe distance (small parts which can be swal-
lowed).
n
Ensure that you have received all the parts required (see check list) and that they are undamaged.
Should you have any cause for complaint, please contact your KETTLER dealer.
n
Before assembling the equipment, study the drawings carefully and carry out the operations in the or-
der shown by the diagrams. The correct sequence is given in capital letters.
n
The equipment must be assembled with due care by an adult person. If in doubt call upon the help
of a second person, if possible technically talented.
n
Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this machine.
n
Ensure that your working area is free of possible sources of danger, for example don't leave any tools
lying around. Always dispose packaging material in such a way that it may not cause any danger. The-
re is always a risk of suffocation if children play with plastic bags!
n
Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten
the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections have been tightened firmly. Atten-
tion: once locknuts have been unscrewed they no longer function correctly (the locking device is de-
stroyed), and must be replaced.
GB KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
+1 757.427.2400
www.kettlerusa.com
+44 1527 62423
Mail: sales@kettler.co.uk
Mail: toys@kettlerusa.com
5