Publicidad
Idiomas disponibles
Idiomas disponibles
ARCHITECTS' SPECIFICATIONS
The microphone shall be a Shure Model SM10A or equiva-
lent. The microphone shall be a moving-coil (dynamic) type
with a frequency response of 50 to 15,000 Hz. The unit shall
have a cardioid polar characteristic. The cancellation at the
rear shall be 15 to 20 dB. The microphone shall be low im-
pedance with a rated impedance of 150 ohms for connection
to microphone inputs rated at 19 to 300 ohms. The micro-
phone output shall be –65.0 dB where 0 dB = 1 volt per 10
microbars. The microphone shall be a head-worn type, and
shall be provided with a 1.5 m (5 ft), non-detachable, two-
conductor, shielded cable with a professional, three-pin, au-
dio connector designed to mate with Cannon XL series,
Switchcraft A3 (Q.G.) series or equivalent connectors. The
microphone shall also be provided with a headband, con-
nector belt clip, and foam windscreen. The overall dimen-
sions of the microphone shall be 203 mm (8 in.) in length and
3
44.5 mm (1-
/
in.) in maximum height (pivot housing). The
4
microphone housing shall be 15.9 mm (
9
and 14 mm (
/
in). in height.
16
SUPPLIED ACCESSORIES AND REPLACEMENT PARTS
The following furnished accessories and replacement parts
may be ordered through your Authorized Shure Dealer or di-
rectly from Shure Incorporated.
Connector Belt Clip
. . . . . . . . . . . . . . . . . . . . . . .
Windscreen
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microphone Cartridge
. . . . . . . . . . . . . . . . . . . . . . . . .
Headband Assembly
. . . . . . . . . . . . . . . . . . . . . .
Retaining Clip
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
/
in.) in diameter
8
RK200BC
RK184WS
R93
90A3997
53A1801A
3 3
Publicidad
