Record Or Delete User Card Or Pin To Operate Door - Steren SEG-150 Manual De Instrucciones

03 to indicate that it will record the common PIN.
The common PIN must be between 4 and 8 digits.
# to confirm.

Record or delete user card or PIN to operate door

Enter the programming mode and enter the following sequence:
10 + Record Option + Number + Read user ID card or enter PIN + #
Where: 10 to indicate that it will record or delete an access card or PIN user.
The recording option is a digit between one and five. The options are:
1 Record only card.
2 Record only user PIN.
3 Record card and user PIN (you need to enter both).
4 Card and Common PIN.
5 Clear the Card or PIN associated with an user ID.
000-999 one of the 1000 user numbers which the system supports
(from 000-999).
Read card means place it near the access control. The PIN must be between
4 and 8 digits. If you select option 3 (card and PIN), read the card and then
enter the PIN.
16
# To confirm