HORIZON 24994 Instrucciones De Instalación página 6

5. Remove bumper fascia – Using plastic trim tools, remove the fascia starting at the outer edges near wheel wells while gently pulling the fascia.
a.)
6. Remove bumper beam – Using 13 mm socket, remove (6) M8 factory bolts
from bumper beam, (3) per side, return to vehicle owner, see figure 1. Remove
bumper beam and foam cover on the top of bumper beam. Return foam cover
to vehicle owner.
©2020 Horizon Global Americas Inc. - Printed in Mexico
b.)
7. Apply sealant - apply silicone sealant to both hitch bracket mounting surfaces,
see Figure 2.
Not included
Sheet 6 of 24 24994NP
Figure 2
03-23-20 Rev. A