Speakerbox Installation - Steren BAF-1596 Manual De Instrucciones

3.- SPEAKERBOX INSTALLATION

Make all initial connections with all the switches in the OFF position. Make sure that
the volume of all devices is low, then you can adjust it.
1.- Move the voltage switch to the corresponding position with your power source that you
want to use (110 or 220 volts).
2.- Connect the power cord to an electrical outlet and turn on the speakerbox.
3.- Connect a microphone in the MIC INPUT via a 6.3mm connector or a Canon type
connector.
4.- Use the line INPUT connectors to connect a player CD, cassette, MP3, DVD, etc.
5.- Turn on all devices.
6.- Adjust the devices volume levels, as well as the speakerbox master volume control.
7.- Adjust the levels of the treble and bass frequencies according to your needs.
8.- If you want to connect another BAF-1596 in cascade, use LINE OUT 6.3mm output.
To connect a passive (non-amplified) speaker, use the SPEAK-ON connector.
7