Snmp Setting - Christie LX1750 Manual De Instrucciones

SNMP setting

This projector provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read only) and Set (read-
write). This projector allows Refer (read only) only. The SNMP message informs the projector
status called "Trap" to an administrator. Click SNMP Setting on the main menu and set up
each item.
PJ information
Item
Contact ............................................... Enter user name of the projector etc. (optional).
Place .....................................................Enter place of the projector (optional).
Community name(refer) ....... Enter community name (read only). Default name is "public".
Trap
Item
Community name ...................... Enter community name to send "Trap". Default name is "public".
Trap address ................................... Enter IP address of the SNMP manager computer to receive "Trap".
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
Description
Description
SNMP setting
29