ASROCK G43TwinsFullHD Manual De Instrucciones página 22

Serial ATAII Connectors
(SATAII_1:
see p.2, No. 12)
(SATAII_2:
see p.2, No. 11)
(SATAII_3:
see p.2, No. 13)
(SATAII_4:
see p.2, No. 14)
(SATAII_5:
see p.2, No. 16)
(SATAII_6:
see p.2, No. 15)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.2 No. 17)
(9-pin USB6_7)
(see p.2 No. 19)
WiFi/E Header
(15-pin WIFI/E)
(see p.2 No. 23)
2 2 2 2 2 2
2 2 2 2
ASRock G43TwinsFullHD Motherboard
SATAII_5 SATAII_3
SATAII_6 SATAII_4
connect to the
power supply
These six Serial ATAII (SATAII)
connectors support SATA data
cables for internal storage
devices. The current SATAII
interface allows up to 3.0 Gb/s
data transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports WiFi+AP
function with ASRock
WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create
a wireless environment and
enjoy the convenience of
wireless network connectivity.