Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Install Windows
2000 is not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows
XP 64-bit on your system. At the beginning of Windows
third-party AHCI driver. When prompted, insert the SATA / SATAII driver diskette
®
containing the Intel
presented. Select the driver to install according to the mode you choose and the OS
you install. You may select: "Intel(R) ICH10 SATA AHCI Controller (Desktop - Win-
dows XP)" for Windows
Windows XP64)" for Windows
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows
2 6
2 6
2 6
2 6
2 6
ASRock G43TwinsFullHD Motherboard
Advanced screen
®
XP / XP 64-bit OS on your system. (Windows
AHCI driver. After reading the floppy disk, the driver will be
®
XP or "Intel(R) ICH10 SATA AHCI Controller (Desktop -
®
XP 64-bit.
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
IDE Configuration.
®
®
XP /
®
setup, press F6 to install a
IDE Configuration.
Publicidad
Tabla de contenido
