Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

1
Cleaning the air hose
□ A 1/2" air hose is required, with a maximum length of 25 ft.
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply.
NOTE: If a longer air hose is required, connect a 3/4"
air hose to the 1/2" air hose to ensure the tool has the
necessary air supply.
2
Connecting to the air supply
□ Always use clean dry air. Excessive moisture and dirt will
greatly reduce the life of any air motor. We recommend the
installation of an in-line filter-regulator-lubricator as close
to the tool as possible.
□ Ensure all hoses and fittings are the correct size and
secured tightly.
Recommended Air Line Set-Up
Part
Description
A
3/4" Impact Wrench
B
Quick Plug
C
Quick Coupler
D
Air Hose
E
In-line Regulator
F
In-line Lubricator
G
In-line Filter
H
Air Compressor
5

Publicidad

Tabla de contenido
loading

Tabla de contenido