Velleman VMB4PD Instrucciones Breves página 7

6. Setting the Clock (this must be done for at least one clock in your system)
1. Go to the first configuration menu (long press the small button)
2. Press the upper left "Clock" button (
(*) If you press the small button, the clock will NOT be set and you will be able to set the clock as master (ON) or slave (OFF).
Set one clock set as master, this clock will update all the clocks in your system once a day.
IMPORTANT: If you want to display the clock, then the timer function of the panel must be enabled (See also page 5)
1. Go to the second configuration menu (long press the small button, then press again)
2. Press the upper left "Mode" button to display the mode menu.
after 30 seconds of inactivity, the module exits' the menu)
The "Hour" button to set the hour
The "Min" button to set the minutes
The "Day" button to select the day of the week:
Mo= Monday; Tu= Tuesday; We= Wednesday; Th= Thursday; Fr= Friday; Sa= Saturday; Su= Sunday
The "Store" button to validate your settings and to start the seconds, it will also update all the clocks
in your system (*) The module switches back to the main page after 2 min. of inactivity .
The upper right button to select the panel operation mode:
OFF: No timer functions are available ( default factory setting ).
4CH: Timer functions can be set on the 4 buttons from the second page only (buttons 5 to 8).
8CH: Timer functions can be set on the 4 buttons of the two pages.
If you want to turn all timers OFF at once (e.g. during vacation period), you could use the OFF setting).
ENGLISH
7