Publicidad
Idiomas disponibles
Idiomas disponibles
9. Timer programming (can also be done using a PC and the Velbuslink software)
Each button can be "automatically" pressed using timed instructions. By default this mode is OFF, see page 7.
If timer functions will be used, do not use toggle buttons, use separate ON and OFF buttons. Consider that combinations can be made
using the timer functions of e.g. a relay module ( Start timer / Stop timer / Staircase..). Download the extended manual for more info.
1
NOTE: After timer steps have been entered, the timer(s) can be enabled or disabled for each programmed button (see also page 5 ).
This is a handy function to disable (or enable) some timed buttons during a vacation period.
Go to the first configuration menu (long
press the small button).
Press the lower right "on/off" button.
Go to the first configuration menu (long press the small button)
Press the lower left "Prog" button to enter the program menu
Select the step you want to use or edit using Up
1. Press Enter (lower left button)
2. Using the upper right button select if this timed action bust be performed:
Never= No action; Mo= Monday; Tu= Tuesday; We= Wednesday; Th= Thursday;
Fr= Friday; Sa= Saturday; Su= Sunday; Sa&Su= Saturday and Sunday; Mo-Fr= Monday to
Friday; Mo-Sa= Monday to Saturday; Mo-Su= Every day.
3. Using the lower buttons select the moment (Hour and Minutes) this step must be executed.
4. Press the small configuration button, then select which button must be assigned to this step.
A
indicates if the timer function is assigned. Repeat step 5 for each of the buttons until
screen 1(re)appears.
5. Add program steps if needed by repeating steps 1 to 5 or press the small button to exit.
▲
or Down
▼
buttons (max 20 steps can be set)
Each press on the small button will select
a "button" page until exit.
Use the lower buttons to enable or dis-
able a timed button.
= Enabled − = Disabled _= Notimer
ENGLISH
9
Publicidad
