Publicidad
Integrated Portal Gateway (IPG) Enclosure Installation
1 1
ATTACH ENCLOSURE
Attach the IPG enclosure (J) to the wall using
the appropriate anchors and screws.
3
ATTACH MOUNTING
BRACKET ASSEMBLY
E
(2x)
C
Attach the mounting bracket assembly (C)
to the IPG enclosure (J) using the two
provided #6-32 x 3/4" machine screws (E
5
INSTALL
(OPTION 1)
ANTENNAS
1
B
(2x)
A
1
Install the antennas (B
) onto the
(2x)
gateway (A) using 4-6 in-lb torque.
The antennas (B
) must be oriented
(2x)
vertically when installed.
2
Slide the gateway (A) onto the
mounting bracket assembly
feet (C) until it snaps into place.
BEST is a trademark of dormakaba USA Inc.
J
NOTE:
IPG enclosure (J)
optional and sold separately;
anchors and screws not
included
J
NOTE:
IPG enclosure (J)
optional and sold separately
).
(2x)
SLIDE/SNAP
ON GATEWAY
NOTE:
IPG enclosure (J)
optional and sold separately
B
(2x)
3
2
A
J
3
The antennas (B
) will pass
(2x)
through the holes in the top
of the IPG enclosure (J).
COMPLETE
2
ROUTE
CABLES
NOTE:
Ethernet cable (H)
not included, required for
install; DC power cable (G)
optional to use, not needed
if powered by PoE; IPG
enclosure (J) optional and
sold separately
Route the Ethernet cable (H) and the DC power cable (G)
into the IPG enclosure (J) using the knockouts and the
cable grommets supplied.
4
CONNECT
CABLES
A
1
Connect the Ethernet cable (H)
and the DC power cable (G)
to the gateway (A).
6
5
INSTALL
ANTENNA KIT
NOTE:
Omni-Directional Antenna Kit (I)
optional and sold separately
I
C
A
1
Install the Omni-Directional
Antenna Kit (I) onto the
gateway (A).
2
Slide the gateway (A) onto the
mounting bracket assembly feet (C)
until it snaps into place.
5/8
G
H
NOTE:
H
not included, required for
2
1
install; DC power cable (G)
optional to use, not needed
G
if powered by PoE
2
Route the Ethernet cable (H) and the DC
power cable (G) into the channel on the
bottom of the gateway (A).
SLIDE/SNAP
(OPTION 2)
ON GATEWAY
NOTE:
IPG enclosure (J)
optional and sold separately
1
Pass through
top of the
enclosure.
2
A
3
The omni-directional cable (I) will
pass through the holes in the top of
the IPG enclosure (J).
A89995_A
2019 All rights reserved.
©
J
Ethernet cable (H)
6
I
3
C
J
COMPLETE
Publicidad
