Overview Of The Components /Scope Of Delivery; Unpacking The Appliance; Initial Operation - ProfiCare PC-DR 3098 Manual De Instrucciones

CAUTION:
This appliance is not intended to be immersed in water during
cleaning. Please observe the instructions that we have included for
you in the chapter "Cleaning".
Overview of the Components /
Scope of Delivery
1 Hose
2 Connecting tip
3 Lid / Filling hole
4 Steam button with lock
5 Handle
6 Boiler / Water tank
7 Heating control lamp
8 Nozzle adapter
9 Universal cleaning attachment
10 Window cleaning attachment
11 Circular brush)
12 Angled nozzle
13 Measuring cup
14 Fleece cloth
Not Shown
Funnel

Unpacking the Appliance

• Remove the main appliance and accessories from the
box.
• Also remove any packaging materials that may be
present.
• Check the scope of delivery.

Initial Operation

Fill in Water
NOTE:
• The maximum filling capacity is approx. 250 ml. Use
the measuring cup provided.
• Recommendation: Use distilled water to prevent
calcification.
CAUTION:
Do not use battery water, water from tumble dryers or wa-
ter with additives such as cleaning agents, alcohol, fabric
softener or other chemicals. They could cause hazards or
damage to the appliance.
WARNING: Risk of injury!
1. Disconnect the mains plug from the wall socket.
32
PC-DR3098_IM
WARNING: Risk of injury!
2. The appliance can be opened only when the pressure
has been relieved. Unlock the lock by pushing it to
ON and holding it there. Then press down the steam
button.
3. If the appliance is still warm, wait approx. 5 minutes
until removing the lid.
4. Unscrew the lid anticlockwise to remove it.
5. Pour any remaining water from the boiler in order to
avoid overfilling.
6. Use the funnel to fill the boiler with a maximum of ap-
prox. 250 ml of water.
7. Attach the lid again by turning it clockwise.
Installation of Accessories
NOTE:
Observe the arrow markings on both the appliance and
accessories.
1. Insert the locking catches of the hose as far as they will
go into the connecting tip of the appliance. Secure the
hose by turning it clockwise.
2. Insert the locking catches of one of the attachments as
far as they will go into the connecting tip of the hose.
Secure the attachment by turning it clockwise.
• You may also connect the attachments directly to the
appliance. Connect as described above.
• Attach the angled nozzle or the circular brush on top of
the nozzle adapter, if required.
• In order to clean sensitive surfaces, attach the fleece
cloth to the cleaning attachment.
• In order to use the window cleaning attachment, hook it
into the cleaning attachment (without the fleece cloth).
Electrical Connection
1. Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the appli-
ance You can find this information on the nameplate.
2. Connect the appliance to a duly installed protective
contact socket.
24.03.21