Freezer Packs; Electrical Connection; Information On The App "Smart Life - Smart Living; Information On How To Use The App - ProfiCare PC-LK 3088 Manual De Instrucciones

Freezer Packs

If you would like to make the ambient air cooler as well, then
proceed as follows:
1. Use the freezer packs included in the accessories.
2. Unscrew the screw cap and fill the freezer packs with
water. Do not pass the MAX label.
3. Replace the screw cap.
4. Allow the freezer packs to freeze and then place them in
the water tank.

Electrical Connection

1. Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
2. Connect the appliance to a duly installed protective
contact socket. A signal will sound indicating that the
appliance is ready for use.
Information on the App
"Smart Life - Smart Living"
The Smart Life - Smart Living app is available for android
and iOS. Scan the corresponding QR code to get directly to
the download.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
Google Play

Information on How to Use the App

This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi con-
nection to your router and the free app "Smart Life - Smart
Living".
You can easily access all functions of the appliance via the
app. Since the app constantly improved, we cannot provide
a more detailed description here.
We recommend disconnecting the appliance from the
power supply when you are away from home to prevent
unintentional switching on while you are on the road!

System Requirement for Use of the App

• iOs 10.0 or higher
• Android 4.4 or higher

Commissioning via the App

1. Install the "Smart Life - Smart Living" app. Create a user
account.
PC-LK3088_IM
2. Activate the Wi-Fi function in the settings of your appli-
ance.
3. Place the appliance within 5 meters of your router.
4. Switch on the appliance using the
5. Press the WiFi button on the appliance. The control lamp
6. Launch the app and select " + ".
7. Select the "Air cooler" menu and follow the instructions
on the display.
The Wi-Fi will be deactivated after 2 minutes have
passed if the appliance is not able to establish a con-
nection with the mobile telephone. Press the WiFi but-
ton on the appliance again to connect the appliances.
8. After the appliance has been successfully connected,
the control lamp
operate the appliance using the app.
NOTE:
The appliance can only be operated with 2.4 GHz routers.
5 GHz routers are not supported.

Disconnecting the Wi-Fi

If you want to disconnect the existing Wi-Fi connection
(control lamp
• Press the WiFi button. The
NOTE:
If you want to re-establish the Wi-Fi connection, press the
WiFi button. The

Reset Wi-Fi connection

If you would like to reset the existing Wi-Fi connection (con-
App Store
trol lamp
1. Press and hold down the WiFi button for approx. 5 sec-
onds. The
2. The Wi-Fi connection will be disconnected and the appli-
ance is removed from the app at the same time.
NOTE:
If you want to re-establish the Wi-Fi connection, proceed
as described in the paragraph "Commissioning via the
App".
You can operate the appliance using the remote control as
well as the buttons on the switch housing. The functions are
identical.
NOTE:
• The buttons on the appliance are sensor touch
buttons. In order to perform the corresponding func-
tion gently touch the buttons. Whenever a button is
pressed, it will be confirmed by a beep sound.
will flash.
NOTE:
will glow continuously. Now you can
is lit), proceed as follows:
control lamp will go out.
control lamp will light up again.
is lit), proceed as follows:
control lamp will blink.

Operation

ON / OFF button.
49
24.11.20