Adjusting The Color Temperature Of The Light - ETI Solid State Lighting FM-15-16-802-SV-D-BT Manual De Uso Y Cuidado

Installation (continued)
4
Attaching the fixture plate to the
electrical box
□ Align the keyholes in the fixture
plate (A) with the mounting
screws (BB), allowing the heads of
the screws (BB) to come through
the large ends of the keyholes.
□ Rotate the fixture
plate (A) until
the heads of the
mounting
screws (BB) slide
into the narrow ends
of the keyholes.
□ Tighten the
mounting
screws (BB) to
secure the fixture
plate (A) to the
electrical box.

Adjusting the Color Temperature of the Light

This LED light fixture allows you to customize
the color temperature of the light using three
settings: soft white, cool white, or daylight.
□ Choose your favorite correlated color
temperature (CCT) from three options: 3000k
Soft White, 4000k Cool White, or 5000k
Daylight.
□ Move the toggle switch on the fixture
plate (A) to make your selection before
attaching the diffuser shade (B) to the fixture
plate (A).
NOTICE: The factory setting for the
correlated color temperature (CCT) is
3000K, which is the warmest white light.
5
Attaching the diffuser shade to
the fixture plate
□ Position the diffuser shade (B) into the fixture
BB
plate (A).
□ Turn the diffuser shade (B) clockwise to secure it
to the fixture plate (A).
□ Restore power at the electrical panel. Turn on the
light switch to activate the fixture.
A
5
Please contact 1-855-384-7754 for further assistance.
A
B
A
B
ETiSSL.com