Step 8
Carefully stand your unit upright.
å
Loosely fasten the BAR SUPPORTS (O) to the LEFT END (D). Use four ALLEN SCREWS (W).
å
Insert the BAR (P) into the BAR SUPPORTS. Tighten the ALLEN SCREWS using the ALLEN WRENCH (NN).
å
Slide the SMALL PANEL (K) into the grooves on the ENDS (B and D) and REAR BRACE (H).
å
P
O
Page 12
W
O
D
www.sauder.com/service
K
NN
H
B
419324