Getting Started; Structure; Initial Start-Up; Select The Language - Bosch FSA 450 Instrucciones De Servicio

28 | EN
...5. Software update and installation of
new languages
9. Turn off the FSA 450.
10.Follow the instructions on the screen to
turn on the FSA 450.
11. Select Exit on the installation screen.
12.Close the Application Download dialog
window.
1 689 979 945 (28.07.2006)
6.

Getting started

6.1

Structure

Connect the battery to the Engine Analyzer.
1. Turn the Analyzer over, loosen the left
strap, and remove the rubber grip on the
left.
The battery is in its compartment with its
cable coiled in the space above the
battery.
2. Uncoil the cable.
3. Plug the cable into the connector located
just above the battery.
4. Return the loose part of the cable to the
compartment above the battery.
5. Replace the rubber grip.
6. Tighten the strap.
6.2

Initial start-up

6.2.1

Select the language

i
Six languages are pre-installed in the
device. The language selected when the
product arrives
languages can be installed with the
language package from CD 1 687 005 008
(see Chapter 5).
FSA 450
is English. Other
Robert Bosch GmbH