Changing The Stand; Operation & Adjustment - Daewoo L510B Manual Del Usuario

CHANGING THE STAND

Removing the stand
Remove 2 screws.
Attaching the monitor with the stand
Use the VESA approved arm-stand.
(75x75 mm hole spacing)
English - 4
Tighten 4 screws.
OPERATION & ADJUSTMENT
Control Panel
EXIT
AUTO
AUTO
•
The AUTO button launches the AUTO TRACKING
function directly.
EXIT
•
The EXIT button turns the OSD (On-Screen
Display) window off.
•
This button moves from sub menu to top menu in
the OSD window.
MENU
•
The MENU button turns the OSD window on.
•
This button moves from top menu to sub menu in
the OSD window.
BRIGHTNESS
•
The button moves cursor to the left or high window
in the OSD window.
•
This button decreases the value of any selected
function.
BRIGHTNESS
•
The button moves cursor to the right or low
window in the OSD window.
•
This button increases the value of any selected
function.
English - 5
MENU BRIGHTNESS