Pre-Operation Check - Honda F660 Manual De Explicaciones

1. Engine oil
Be sure to check the tiller on a level surface with the engine stopped.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Insert the dipstick into the oil filler neck, but do not screw it in.
3. If the level is low, fill to the top of the oil filler neck with the recom-
mended oil.
Use 4-stroke motor oil that meets
or exceeds the requirements for
API service category SE or later
(or equivalent). Always check the
API service label on the oil
container to be sure it includes
the letters SE or later (or
equivalent).
SAE 10W-30 is recommended for general use. Other viscosities shown
in the chart may be used when the average temperature in your area is
within the indicated range.
Using nondetergent oil or 2-stroke engine oil will shorten the
engine's service life.
Engine oil is a major factor affecting engine performance and
service life.
Non-detergent or vegetable oils are not recommended.
Running the engine with insufficient oil can cause serious engine
damage.
O O I I L L F F I I
OIL FILLER NECK
4.

PRE-OPERATION CHECK

L L L L E E R R C C A A P P
UPPER
LIMIT
AMBIENT TEMPERATURE
13