Installation; Standard Delivery; Installation Overview - Kongsberg Simrad Marine TV45 Manual

Simrad Marine TV

6. Installation

6.1 Standard delivery

The satellite tracking system SIMRAD Marine TV comes complete with elec-
tronic assemblies, cables and other necessary installation material.
System components:
Please check the completeness of all components. Make sure that no trans-
port damages exist before you start the installation.

6.2 Installation overview

The installation work has to be done in the following order:
• Select location
• Check the mounting surface for stability
• Check cable path
• Position of power distributor
• Drill holes and lay the cable
• Install antenna unit (see also addendum for instructions of how to
undo the fixed transportation position before power-up)
• Make all installation openings watertight
• Connect cables
For the installation the following tools are needed:
• Electric drill
• One 4mm and one 8.5-9mm bits
• Hexagon socket wrench size 6
• Wrench M 8
Plan the entire installation first! To avoid mistakes or damages to the
boat or satellite tracking system, please read the installation instructions
carefully before starting the installation.
• Antenna unit (with serial number)
• Control unit
• Four mounting screws M8
English-27