Installation; Mounting The Pdu - Tripp-Lite PDUMH15NET Manual Del Propietário

Installation

Mounting the PDU

The PDU supports five primary mounting configurations: 1U Rack, 0U Rack (Vertical), Wall, Under-
Counter and Reduced-Depth.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before
mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may
not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the
mounting brackets to the PDU are included. Use only the screws supplied by the manufacturer, or their exact
equivalent (#6-32, 3/16" flat head).
1-1
1U Rack Mounting: Use 3 screws
attach each of the 2 longer mounting
brackets
B
can mount the PDU in a recessed
position by attaching the mounting
brackets so they extend beyond the front
panel of the PDU. Mount the PDU in the
rack by inserting 4 user-supplied screws
through the mounting brackets
C
into the mounting holes of the rack rails.
1-2
0U Rack Mounting: Use 3 screws
attach each of the 2 shorter mounting
brackets
B
Mount the PDU vertically by inserting 2
or more user-supplied screws
the mounting brackets
mounting points in the rack or rack
enclosure.
1-3
Wall Mounting: Use 3 screws
attach each of the 2 shorter mounting
brackets
B
Mount the PDU to the wall by inserting
2 or more user-supplied screws
through the mounting brackets
into secure mounting points.
21-03-425-93368A.indb 3 21-03-425-93368A.indb 3
A
to the PDU as shown. You
D
to the PDU as shown.
through
C
and into
D
to
A
to the PDU as shown.
C
and
D
to
A
and
1-1
to
A
B
A
1-2
B
A
1-3
3
A
B
D
C
D
C
D
C
4/5/2021 2:41:43 PM 4/5/2021 2:41:43 PM