Ratio AR36NM Manual De Instrucciones página 31

SCREW DRIVER SAFETY WARNING
Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
SAFETY WARNINGS FOR BATTERY CELLS INSIDE
THE TOOL
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not store power tool haphazardly in a box or
drawer where charging terminal may short-circuit each other or be short-circuited by
conductive materials. When power tool is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection
from one charging terminal to another.
c) Do not expose power tool to heat or fire. Avoid storage in direct sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or
eyes. If contact has been made, wash the affected area with copious amounts of water and
seek medical advice.
f) Seek medical advice immediately if a cell has been swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry cloth if they become dirty.
i) Power tool needs to be charged before use. Always refer to this instruction and use the
correct charging procedure.
j) Do not maintain power tool on charge when not in use.
k) After extended periods of storage, it may be necessary to charge and discharge the power
tool several times to obtain maximum performance.
l) Battery gives its best performance when it is operated at normal room temperature (20 °C ±
5 °C).
m) When disposing of cells, keep cells of different electrochemical systems separate from each
other.
n) Recharge only with the charger specified by POSITEC. Do not use any charger other than
that specifically provided for use with the equipment. A charger that is suitable for one type of
battery may create a risk of fire when used with another battery.
o) Keep power tool out of the reach of children.
p) Retain the original product literature for future reference.
q) Dispose of properly.
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
31