Installation Methods - Sonoff PIR3-RF Manual Del Usuario

SONOFF TECHNOLOGIES CO., LTD.
Launch eWeLink APP, select the Bridge to be paired, tap "Add"and select "Alarm", and
you will hear a "Beep"that indicates the Bridge enters the pairing mode, then short
press the pairing button on the device (or make the device detect the movement )
that the pairing is successful when the red LED keeps on for 1s and the Bridge makes
a"Beep-Beep"sound.
If the addition failed, move the sub-device closer to the Bridge and try again.

Installation methods

Method1:
3M
Method 2:
The motion sensor-base is not included, please purchase it separately.
Do not install on the metal surface, otherwise it will affect the wireless communication
distance.
The device weight is less than 1 kg. The installation height of less than 2 m is
recommended.
>
3M
Motion Sensor-BASE
6
English