Important - Thermador CHMHP366W Manual Del Usuario

Telescoping Extension
Installation
IMPORTANT: Secure the Hood to the wall after installing
the Extension Mounting Bracket, but before installing the
Telescoping Chimney Extension. Follow the Hood's
Installation Instructions before securing the Extension.
Securing the Telescoping Extension Bracket
1. Ensure that the minimum height of 30" (762 mm) from
the bottom of the hood to the cooking surface will be
maintained (see the Hood's Installation Instructions).
2. Locate two studs at the mounting location.
3½" (89) 3½" (89)
A A
18" – 35" 18" – 35"
( 457 – 889) ( 457 – 889)
Model
36'' 14'' (356)
48'' 14'' (356)
B B
17" 17"
(432) (432)
18" 18"
(457) (457)
(457) (457)
A
20¾'' (527)
32-7/8'' (835)
3. At the wall stud locations, measure 3½'' (89 mm)
down from the ceiling to the top of the bracket.
4. Mount the bracket at the wall stud locations using (2)
1½'' (38 mm) screws (provided). Ensure that the
bracket is level.
inches (mm)
5. Insert the complete duct cover at an angle and swivel
toward the wall.
18" 18"
inches (mm)
B
3½" (89) 3½" (89)
Page. 5