DeWalt DW0165 Manual Del Usuario página 18

Measure the height (Figure
8.
E
• Position the tool at one end of the room
or object and point the laser dot across
the height. (Figure
to position the tool if you are measuring
from the bottom of the tool).
• Press
measurement on the third line of the
screen.
Follow the same steps to measure the
9.
width, length, and height of the second
room or object.
View the Volume measurement at the
10.
bottom of the screen (Figure
Measuring the Height of a Tall Object
If you need to measure the height of a tall
object (e.g., a tall building), you can calculate
the height based on the distance to 1 point
or the distances from the same point to 2
points on the object. The tool will use the
Pythagorean Theorem (C
the height.
Distance to 1 Point
You can use the distance to one point on a
wall or object (Indirect Height) to determine
its height (Figure
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press
2.
on and display the red laser dot.
Make sure the tool position setting
3.
(Figure
C 4
measurement.
18
O 3
shows where
O 3
to display the height
O 4
=A +B ) to calculate
2 2 2
).
P
A 1
(Figure ) to turn the tool
A 3
) is correct for taking the
).
Select
4.
• Press
(Figure
• Press
• Press
Type Menu (Figure
• Press the arrow buttons to select
• Press
Position the tool opposite the bottom of
5.
the vertical height to be measured (Figure
P 1
Point the laser toward the highest point of
6.
).
the building or object whose height you
need to measure (Figure
Press
7.
View the height measurement at the
8.
bottom of the screen (Figure
Distances to 2 Points
You can use the distance to two points on
a wall or object (Double Indirect Height) to
determine its height (Figure
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press
2.
) toward
on and display the red laser dot.
Make sure the tool position setting
3.
(Figure
measurement.
as the measurement type.
to display the Main Menu
).
E 2
to select .
to display the Measurement
E 3
.
).
to measure the distance.
Q
(Figure ) to turn the tool
A 3
) is correct for taking the
C 4
).
.
).
P 1
).
P 2
).
) toward
A 1