DeWalt DW0165 Manual Del Usuario página 23

Select as the measurement type.
3.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement
Type Menu (Figure
• Press the arrow buttons to select
(Figure ).
E 4
• Press .
View the last measurement that was
4.
taken. Press to scroll through all the
measurements that have been stored in
the tool's memory (up to 20). Press
scroll back.
Clearing the Tool's Memory
You can clear one or more measurements that
are currently in the tool's memory.
Clearing a Measurement
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press (Figure
2.
on and display the red laser dot.
Select as the measurement type.
3.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement
Type Menu (Figure
• Press the arrow buttons to select
(Figure ).
E 4
• Press .
.
).
E 3
to
) toward
A 1
) to turn the tool
A 3
.
).
E 3
Specify which measurement you want to
4.
delete:
• To delete a specific measurement,
continue with step 5.
• To delete ALL measurements, skip to
step 6.
To delete a specific measurement:
5.
• Press or
measurements that have been stored
in the tool's memory (up to 20) until you
display the measurement to be deleted.
• Press .
• Select and press
measurement.
To delete ALL measurements:
6.
• Press .
• Select and press
measurements from the tool's memory.
Turning Off the Tool
The tool can be turned off in either of these
ways:
• Press and hold
you release after 10 seconds, the tool
will turn off.
• If you do not use the tool for 90 seconds, it
will automatically turn off.
Calibrating the tool
Please note that if you do not position the
tool correctly for each step of the calibration
process, will appear in red on the screen
(Figure ).
X
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
to scroll through the
to delete the
to delete all
for 10 seconds. When
) toward
A 1
E
23