CLEAN THE UNIT
EN
Parts of plants, such as roots, can become tightly
wrapped around or between the rotating blades during
operating. To clean the rotating blades:
◾
Remove the battery.
◾
Wear gloves. Clean the pieces of roots, clogged soils
or plants on the blade, guard or the gear box. For
thorough cleaning, remove the blades and guard to
wash them thoroughly. For detailed replacement steps
please see above section
"REPLACING OR ADJUSTING THE BLADES".
◾
Wipe the tool surface with a clean cloth moistened with
a mild soap solution
STORING THE UNIT
◾
Remove the battery pack from the tool.
◾
Remove the cultivator attachment from the power head
and cover the attachment shaft with end cap to avoid
dirt getting into the coupling.
◾
Store the tool in a dry, well-ventilated area, out of the
reach of children. Do not store the unit on or adjacent
to fertilizers, gasoline, or other chemicals.
Protecting the environment
Do not dispose of electrical equipment,
battery charger and batteries/
rechargeable batteries into household
waste! According to the European law
2012/19/EU, electrical and electronic
equipment that is no longer usable, and
according to the European law
2006/66/EC, defective or used battery
packs/batteries, must be collected
separately. If electrical appliances are
disposed of in landfills or dumps,
hazardous substances can leak into the
groundwater and get into the food chain,
damaging your health and well-being.
12
CULTIVATOR ATTACHMENT — CTA9500