EGO Power+ CTA9500 Traducción De Las Instrucciones Originales página 7

Ocultar thumbs Ver también para Power+ CTA9500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces may lead to unsafe handling and/or
loss of control of the tool.
Keep cables away from the working area of the
tool. During operation cables may be hidden from view
and can be accidentally damaged by the tool.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
OTHER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
Never work while people, especial children or pets are
nearby.
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
While working, always wear substantial footwear and
long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
Thoroughly inspect the area where the equipment is to
be used and remove all objects which can be thrown
up by machine
Before using, always visually inspect to see that the
tools are not worn out or damaged. Replace worn out
or damaged elements and bolts in sets to preserve
balance.
Operation
Do not operate the engine in the confined space where
dangerous carbon monoxide fumes can collect
Work only in daylight or in good artificial light
Always be sure of your footing on slopes
Walk, never run with the machine.
For wheeled rotary machines, work across the slopes,
never up and down.
Exercise extreme caution when changing direction on
slopes.
Do not work on excessively sleep slopes.
Use extreme caution when reversing or pulling the
machine towards you.
Do not change the engine governor settings or over
speed the engine.
Start the engine carefully according to manufacturer
instructions and with feet well away from tool.
Do not put your hands or feet near or under rotating
parts.
Never pick up or carry a machine while the engine is
running.
Use only with EGO's battery packs and chargers listed
below:
CULTIVATOR ATTACHMENT — CTA9500
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido