Structural Proximity and Safe Usage Recommendations
REMINDER: Maintain a
minimum distance of 10
feet from rear and sides to
walls, rails or other
combustible construction.
This clearance provides
adequate space for proper
combustion, air circulation
and venting.
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
•
• Assemble on a clean flat surface.
• Tools needed: 8-inch long Phillips head screwdriver, pliers or adjustable wrench
• Approximate assembly time: 45 minutes
• Actual product may differ from picture shown.
• It is possible that some assembly steps have been completed in the factory.
DO NOT RETURN TO RETAILER for assembly assistance, missing or damaged parts. Please
contact MASTERBUILT customer service at 1-800-489-1581 or support.masterbuilt.com. Please
STOP
have the model number and serial number available. These numbers are located on the silver
rating label on the grill.
Packing Contents
IMPORTANT: Remove all packing contents before assembly.
It is important that you remove all paper,
packing foam and cardboard from the grill
before assembly.
Located on the lid/firebox assembly is a
support bar used for shipping purposes only.
This bar must be removed so that you may
successfully assemble your grill. The location
of this bar is shown here. The bar is no longer
needed.
4
10 Feet
10 Feet
Remove support bar
10 Feet