Chauvet DJ LFS-5D Guía De Referencia Rápida página 3

LFS-5D QRG
What Is
Included
To Begin
Description
Overview and
Mounting
Mounting
AC Power
Power Linking
Fuse
Replacement
· LFS-5D
· Power Cord
· 4 Metal Gobos
Unpack your LFS-5D and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not Chauvet.
The LFS-5D is a compact and lightweight LED framing spot, with framing
shutters that can alter the beam to highlight specific areas. Using the included
gobos or your own custom gobos, you can project your image from almost
any distance with the 16°-24° zoom range. Fade the LED by connecting to a
dimmable circuit.
Framing
Shutter
(x4)
Power Out
Before mounting this product, read the
This product has a single-voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz.
You can link up to 23 LFS-5D products at 120 VAC or 45 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
· 4 Framing Shutters
· Warranty Card
· Quick Reference Guide
Fuse
Holder
Focus
Gel Frame
Gel frame Holder
Safety
3
Mounting
Bracket
Bracket
Adjustment
Knob
Power In
Gobo Access
Knob and Door
Zoom
Notes.
EN