Steren WR-810 Manual De Instrucciones página 18

4. INSTALLATION
2. Connect a sound amplifier to the receiver. You can use either exit MIXED OUTPUT, with
a 6.3 mm plug cable, or the MIC 1 and MIC 2outputs with a cannon type cable (these
connections will remain independent).
AC INPUT
AC 110V
50/60Hz
3. Insert the power cable into the receiver and plug it in to an
electrical outlet.
4. Put the volume controls on the minimum.
5. Turn on the receiver.
AC INPUT
AC 110V
50/60Hz
7 7