Equipotential-Bonding Connections And Fuses - Pfannenberg DTS Serie Manual De Instrucciones

ENG
4.6.8

Equipotential-bonding connections and fuses

Fig. 17: Equipotential-bonding/fuses
NOTE
Potential equalization provided by customer
I v
connected at the connecting point of the function potential equalization.
The connecting point is labeled with the necessary circuit symbol.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 / 460 V, 3~ | 086100007e
1 Fuses (F2, F3) for transformer as protection against
fault current, overload current and short-circuit current.
2 Functional equipotential-bonding
signal reception with low interference between the unit
and the switch cabinet.
3 Protective equipotential bonding
components and touch voltage.
' x q z
(M8 thread), for a
for metal
EM ,
40/60