Kohler K-18865 Guia De Instalacion página 5

Filtration Inlet Hose
A
Filtration
Outlet Hose
B
Male Plug
2. Connect the Supplies
For all installations:
Install the sink (if needed) according to the sink manufacturer's
instructions.
Connect the hot and cold water supplies. Left is hot, right is cold.
Tighten all connections.
For installations with a water filtration system (A):
NOTE: Although the water filtration system selected may differ
from the one illustrated (Kohler Model K-200), the instructions still
apply.
Connect the filtration inlet hose to the filtration outlet hose of the
water filtration system. Refer to the installation instructions
packed with the water filtration system.
Turn on the main water supply and check for leaks. Repair as
needed.
Run water through the system for several minutes to remove any
air in the system.
For installations without a water filtration system (B):
Cap the filtration inlet hose with a male plug.
Turn on the main water supply and check for leaks. Repair as
needed.
Kohler Co.
Connect the
water supplies.
Hot Water
Supply
Cold Water
Supply
Optional Water
Filtration System
5 1068887-2-A