Inserting And Removing The Micro Sd Card - Toshiba CAMILEO CLIP Guía De Usuario

All manuals and user guides at all-guides.com
16
Getting Started
Inserting and Removing the Micro SD Card (optional)
NOTE
❖
❖
NOTE
Never charge the battery by a method other than as instructed. Doing
so may cause a fire or explosion possibly resulting in serious injury.
Inserting and Removing the Micro SD Card (optional)
The camcorder comes with a limited internal memory which allows
you to store limited photos and videos. You can expand the memory
capacity by using an optional Micro SD memory card.
1 Open the ports cover.
2 Insert the Micro SD card (Optional) into the slot until it locks
properly.
3 To remove the Micro SD card, press inward to release it and
gently pull it out.
NOTE
When a memory card is inserted, photos and videos are saved onto
the card rather than the built-in memory.
Be sure to remove the protective film on the lens before using.
You may also use the optional USB AC adaptor (Rated at 5V, 2A)
to charge the built-in battery. Approximate charging time is up to
2.5 hours (optional USB AC adaptor may be purchased
separately).