20
Getting Started
Inserting and removing an SD™ Card (optional)
Inserting and removing an SD™ Card (optional)
NOTE
Your camcorder comes with internal memory that allows you to
store photos and videos. You can expand the memory capacity by
using an optional SD/SDHC/SDXC memory card.
1
Open the SD™ Card cover.
2
Insert the SD™ Card into the slot until it locks into place, as
shown below.
(Sample Illustration) Inserting and removing an SD™ Card
NOTE
Protecting data on an SD™ Card
Photos or videos cannot be recorded on an SD™ Card when the
card is locked (read only), however photos and videos can be
viewed.
Make sure the lock is in the writeable position before recording
photos and videos as shown below.
Writeable
position
(Sample Illustration) Protecting data on an SD™ Card
An SD™ Card must be purchased separately.
When a memory card is inserted, videos and photos are saved to the
card rather than the built-in memory.
Write-protected
position
To remove the
SD™ Card, press
inward to release
it. When the card
pops out, grasp
it and pull it
straight out.