Rola Hull-Hugger 59914 Manual Del Usuario página 5

Repeat steps 2 - 5 for securing the second Support Arm.
To ensure the Support Arms will be straight, use the same
​
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Installation Instructions
height measurement as the first Support Arm.
Hull-Hugger™ Watercraft Storage Unit | Product Code: 59914
Hold the Support Arm (A) in place.
Using an electric drill or socket wrench,
affix the support arm to the wall using four
(4) 13mm Lag Bolts and Washers.
NOTE: Depending on the wall being used,
additional hardware may be required (not
included).
Feed the Cam Buckle Strap (B) through
the Cam Buckle Cover (C), leaving the
cam buckle exposed at the end.
Loop the Cam Buckle Strap (B) through the top
of the first Support Arm (A) and knot.
Page 5 of 9
5
6
7
8
59914N Rev A 3/15