Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Installation Instructions
Hull-Hugger™ Watercraft Storage Unit | Product Code: 59914
If using the included Cam Buckle Straps
(B) to store an additional kayak
underneath your Hull-Hugger™, prior to
loading the first watercraft onto the
Support Arms (A), feed the Cam Buckle
Strap (B) through the Cam Buckle Cover
(C), leaving the cam buckle exposed at the
end.
Feed the end of Cam Buckle Strap (B) up
through the first strap loop on the Support
Arm (A) and then down through the
second strap loop on the Support Arm (A)
as shown.
Insert the strap end into the cam buckle
and pull to create a loop as shown.
Slide the Cam Buckle Cover over the cam
buckle to protect watercraft during storage.
Page 7 of 9
12
13
14
59914N
Rev A
3/15